Clavus Chisel

Clavus Chisels are available in 5 to17 tines that creates a difference from its’ similar. Moreover, no soldered steel rolled iron is used in the chassis and special alloyed steel cast used for tines. Breaking the soil surface which was formed by ploughing for a long time, processing the soil without tipping and airing are the main functions of the chisel type plough. In this type plough, safety pins come into action in case of sudden pressure and prevent the tractor and the chassis against possible damage. The tines are designed for getting the maximum performance from tractor power by giving them the most appropriate submersion angle.

Category: Soil Preparation

TECHNICAL DETAILS
PICTURES

TECHNICAL FEATURES	UNIT	MODEL
TECHNICAL FEATURES	UNIT	CLAVUS 5	CLAVUS 7	CLAVUS 9	CLAVUS 11	CLAVUS 13	CLAVUS 15	CLAVUS 17
Number Of Tines	pcs	5	7	9	11	13	15	17
Working Width	cm	128	191	235	289	341	391	441
Total Width	cm	157	220	270	320	370	420	470
Length Without Roller	cm	110	110	110	120	120	120	120
Length With Roller	cm	187	187	187	197	197	197	197
Total Height	cm	133	133	133	133	133	133	133
T7 Working Depth / Weight	cm - kg	68 / 29.3	68 / 29.3	68 / 29.3	68 / 29.3	68 / 29.3	68 / 29.3	68 / 29.3
T4 Working Depth / Weight	cm - kg	48 / 18	48 / 18	48 / 18	48 / 18	48 / 18	48 / 18	48 / 18
Weight Without Roller	kg	400	450	560	700	850	1050	1200
Weight With Roller	kg	565	650	800	970	1160	1375	1590
Frame	mm	100 x 100 x 8	100 x 100 x 8	100 x 100 x 8	100 x 100 x 8	100 x 100 x 8	100 x 100 x 8	100 x 100 x 8
Required Power	hp	60 - 70	70 - 80	80 - 90	90 - 100	100-110	110 - 120	120 - 130