Sqaure Bale Processor
AGROLEAD Sqaure Bale Processor is specially designed to handle most round and rectangular bales. Our machine offers the same outstanding range of functions which is designed to make bedding down the large bales as quick, efficient and safe as that can be carried out by just one man.
• Support wheel offers protection in all rough field conditions,
• Balanced crop stream thanks to high-performance feeding system,
• Small transmission system delivers the power from main transmission to the fork system,
• Balanced and proper power distribution with wide diameter and heavy flywheel,
• Heavier and more compact bales thanks to the powerful piston system,
• The chain system that gives movability to the extra-assisted knotter set,
• Large twine bale box for a non-stop productivity,
• 2 twines knotter set works flawlessly and high-accuracy with its central lubricating system,
• Fan system works quiet and fast. It allows the permanent cleaning under all conditions,
• Extra-amplified compression chamber for more dense and heavy bales,
• Needle protect system prevents any possible damages to the needles in all rough field conditions
TECHNICAL DETAILS | Unit | MODEL | |
BALER 165S | BALER 180S | ||
BALE CHAMBER | |||
Chamber Size | cm | 36 x 46 | 36 x 46 |
Stroke | cm | 71 | 73 |
Ram Stroke | Stroke / Min | 93 | 92 |
Feed Window | cm2 | 1500 | 1570 |
BALE | |||
Productivity | Bale / Day | 30 - 135 | 2000 - 2500 |
Bale Length | cm | 20-35 | 30 - 135 |
Bale Weight | kg | 2000 - 2500 | 25 - 35 |
Knotter Set | 2 twines | 2 twines | |
PICK – UP SYSTEM | |||
Pick-Up Width | cm | 165 | 180 |
Bar Gap | mm | 70 | 70 |
Tine Bars | 5 | 5 | |
Number of Tines | Item | 100 | 110 |
BALER DIMENSIONS | |||
Tire Right | 225 / 70 / R15 | 10,0 / 75 - 15,3 Tubles 12 PLY | |
Tire Left | 10,0 / 80 - 15,3 Tubles 10 PLY | 10,0 / 75 - 15,3 Tubles 12 PLY | |
Rear Middle Support Wheel | 16,5 x 6,50 - 8 6 PR | 16,5 x 6,50 - 8 6PR | |
Support Wheel | 400 x 8 6 PR | 400 x 8 - 6PR | |
Weight | kg | 1754 | 2192 |
Length of Baler (on road) | cm | 505 | 553 |
Length of Baler (on duty) | cm | 608 | 638 |
Width of Baler | cm | 237 | 255 |
Height of Baler | cm | 182 | 187 |
Minimum Power Requirement | HP | 45 | 50 - 60 |
PTO Drive | 1/min. | 540 | 540 |
Transmission | 2 Shaft | 2 Shaft |
Technical Specifications | Model |
BALER 165SW | |
Features | ■ = Standart . □ = Optional. - =Not Avaible |
Maintanence-Free Compact Knotter (Twine Tying) | ■ |
Shaft Drive | ■ |
Automatic Safety Devices | ■ |
Pick-Up Lifting Device | ■ |
Twine Tying Device | ■ |
Bale Counter | ■ |
Drawbar With Adjustable Jack | ■ |
Universal Drive Shaft with Free Wheeling Clutch | □ |
Universal Drive Shaft With two Wide Angle Joint And Free Wheeling Clutch | - |
Bale Thrower | - |
Trailer Hitch | ■ |
Pick –Up Guide Wheel | ■ |
Hydraulic Pick-Up Lifting System | ■ |
Lighting Set | ■ |
Wire Tying System | ■ |